Monthly Archives - November 2018

GE Monogram Refrigerator Noisy Mullion

GE Monogram Refrigerator Noisy Mullion maybe loud and some may flip closed during door operation.  Mullions may make noise against the bins when the left door is opened. Occasionally the mullion may also flip back to the closed position during door openings. Models affected: ZIPS360NHA, ZIPP360NHA, ZIP360NHA Solution: The two foam strips have been replaced with three rubber bumpers. Mullions with two foam strips should be replaced with WR17X26528. If the mullion is loose and flips back to the closed position (shown in the above pictures), one or two bushings (WR02X26692) should be added between the lower mullion hinge and the mullion to tighten the mullion. Note: When bushings are used, ensure the top of the mullion is not rubbing the top of the mullion striker. Should the mullion be rubbing remove a bushing. 

GE Monogram Refrigerator Repair San Diego


MD Appliance LLC offers professional Monogram Refrigerator Repair San Diego CA. No matter how extensive the damage to your GE Monogram Refrigerator may be, our technicians will fix it. They are true professionals, carefully screened and trained. They cover appliance maintenance, diagnostics, repair, and customer relations. They only use genuine GE parts for your appliance needs. Above all, our mission is to provide you with guaranteed satisfaction and the highest quality service possible. We appreciate your business, and we are looking forward to work on your GE Monogram Refrigerator.
 

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Appliance Repair San Diego

Bosch Dishwasher Repair Error E23

Bosch Dishwasher Error E23 is the drain pump error. Appliance behavior: Sanitized LED flashes and E:23 shows on display. Part affected: Drain pump Possible causes: Faulty drain pump harness, faulty drain pump. Solution: Check continuity between drain pump and power module. If harness is faulty, replace it.  Measure drain pump resistance between any 2 terminals. If ≈ 80.5 Ω (at room temperature), replace power module. If not, replace drain pump.

Bosch Dishwasher Repair San Diego


MD Appliance LLC offers professional Bosch Dishwasher Repair San Diego CA. No matter how extensive the damage to your Bosch dishwasher may be, our technicians will fix it. They are true professionals, rigorously screened, and trained. Their performance cover product maintenance, diagnostics, repair, and customer relations. They only use genuine Bosch parts for your appliance needs. Above all, our mission is to provide you with guaranteed satisfaction and the highest quality service possible. We appreciate your business and we are looking forward to work on your Bosch Dishwasher.
 

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Appliance Repair San Diego

Miele Dishwasher Repair F13 Error

Miele Dishwasher Repair F13 Error: Water intake Fault at the End of the Step

Symptom of the Miele Dishwasher Repair F13 error: The program is interrupted and the drain pump is operated. Therefore,  when desired number of pulses has not been detected within certain time (max 4min) the fault F13 is registered.  Possible Causes:
  • Low water pressure.
  • Water Shut-Off Valve defective.
  • Water Inlet Valve defective.
  • Flow Meter defective.
  • Filter in WPS clogged.
Solutions:
  • First check the water supply pressure and the water supply shut-off valve.
  • If ok,  check the WPS filter and clean it if necessary.
  • Check the water inlet valve for malfunction.
If you can not resolve the problem please call our service center for service, or schedule the appointment online.
MD Appliance LLC offers  Miele Dishwasher Repair San Diego CA. We service and repair Miele appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your Miele appliances receive the service that you deserve. As a specialists in Miele dishwasher repair our technician will make sure to explain the problem before servicing your appliance. We use only genuine Miele parts for your appliances and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Miele Appliance.
 

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Appliance Repair San Diego